Step By Step Guide To Make Orgonite

Step By Step Guide To Make Orgonite

By now most of us are ware about the theory of Orgone Energy and the many benefits it has to offer. The concept of Orgone energy was coined by Dr. Wilhelm Reich back in the 20Th Century and since then it has garnered lot of attention. Orgone energy has numerous benefits and is known as life force energy.

In this article you will find a step by step guide to make Orgonite on your own. So let’s get started!

Materials Needed

  • Metal Shavings- You won’t need very fine metal filings nor large pieces of metals. So what is the right size? Quarter inch wide aluminum curls are commonly found and are effective. Any metal of your choice can be used. For example brass, iron, copper, bronze etc.
  • Quartz Crystals- Any funky and Smokey piece of quartz will work perfectly for Orgonite. Quartz crystal can be easily found at all gem and minerals shop.
  • Fiberglass/Epoxy Resin- Any kind of organic resin works well. But liquid resins are the easiest to work with.
  • Molds- The shape of mold depends on the type of Orgonite device you want to create. But remember, the mold must be capable of withstanding boiling temperatures.
  • Other Stuff- A container for mixing purpose like a bucket or any other having pouring lip, old rags and towels, safety Gloves and glasses, Catalyst (Hardener), wooden stirring sticks and a large , flat surface for leaving the Orgonite to cure.

Steps to make Orgonite-

Once you have assembled all the necessary materials, it is time to get started with making Orgonite.

  • Set up the ingredients and put on your safety gloves and glasses appropriately.
  • Fill the mold half way with metal shavings
  • Now put the quartz crystals in with the metals. Here you can add more crystals of your choice.
  • Now comes the resin. The catalyst package will have instructions to tell you how much you need to mix. Always remember- add activator to the resin and never the other way. It can explode otherwise)
  • Use plastic stuff to mix the resin. (Cured resin is near impossible to get rid off. So be careful of what you use). Mix resin with the catalyst for 60 seconds
  • Now, pour resin into the mold and let it cure on its own. Do not take out the Orgonite from the mold for at least 24 hours.

----------------------------------------------------------------------------------------------------------

 

For the best purchases, Orgonite Crystals is an online store that provides the best orgone products like pyramidspendantsnecklacebraceletsdodecahedronsobeliskscrystal gift sets  and so on., you can always visit Orgonite Crystals.  Our highlight is that we provide products at the most affordable rates, helping you fill your life with positivity, along with budget savings.

 

-----------------------------------------------------------------------------------------------------------

 

I absolutely love and encourage all feedback from my readers! However, I do not regularly moderate Comments on the Orgonite Crystal blogs. So if you have a specific question or query that you’d like us to answer, please contact us via our Facebook page


Leave a comment

Please note, comments must be approved before they are published